DWG Procedure Manual Updates and High-Resolution Data Requirements
Stay up to date with the latest DWG updates, including changes in the Procedure Manual and feedback on NOGRR 255. Learn about language updates, proposed changes, and discussions during recent meetings. Stay informed and engaged in dynamic model validation processes.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
DWG Report to ROS Javier Martinez DWG Chair October 5, 2023
DWG Update Update on NOGRR 255 DWG Procedure Manual Update DWG next meeting will be held on 10/24/23.
NOGRR 255-High Resolution Data Requirements During DWG August meeting, ERCOT presented the current state of NOGRR255 and went through the language changes. DWG has reviewed NOGRR 255 and has provided its feedback and comments to ERCOT. DWG consensus it that the requirements is sufficient for dynamic model validation.
DWG Procedure Manual Update DWG Procedure proposed changes are summarized below: 1)Section 3.1.1: The language was updated to reflect that the current PSS/e version is 35 and to remove references to version 33. 2)Sections 3.1.5.4 and 3.1.5.5: Language regarding active power reduction in the VRT tests was updated to remove a hard 5% P reduction limit. 3)Section 4.1.1: The language was updated to reflect a HRML case (rather than HWLL) and the case development example was updated accordingly.
DWG Procedure Manual Update Section 3.1.1 Section 4.1.1
DWG Procedure Manual Update Section 3.1.5.4 Section 3.1.5.5
