Fire Extinguisher Use: Safety Guidelines & Training
In this informative content, learn about the safe and effective use of portable fire extinguishers. Understand the general principles, types of fires, when to use an extinguisher, and the different types available. Get insights on choosing the right extinguisher for specific fire types, capacity ratings, and step-by-step instructions on how to use one correctly. Ensure your safety by being well-informed and trained in fire extinguisher use.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
Digital Factory Factory digitalization LabSheet Professor Dr. Athakorn Kengpol Curriculum Development of Master s Degree Program in Industrial Engineering for Thailand Sustainable Smart Industry
Lab Sheet: Gear factory This lab suppose you are production engineer in gear factory Blank parts (raw material) arrive by pallet at Receive location. The Work piece arrives at pallet 5 minutes per 1 piece. From the Receive location they are sent to NC Lathe1 or NC Lather2, where they undergo a lathe operation to be Cog that takes an average of 3 minutes. The cogs go to the degrease location, where they are batched of two pieces then removed exceed grease by degreasing machine that take 5 minutes. After degreasing, each cog goes to the inspection location. For the inspection process take a time that is uniformly distributed with a minimum 4minutes. The last process is assembly the passing cogs with a bearing that takes a minimum 2 minutes uniformly distributed.
Lab Sheet: Gear factory The processes are showed in Figure . There is only one operator in the department to operate all processes. You need to improve this process with the goal to reduce cycle time and increase production rate. You are interesting in the number of operator. Unfortunately, you cannot experiment with the physical system. In this situation, you may think about the factory digitalization. Layout of gear factory
Lab Sheet: Gear factory Assignment Created simulation model of the gear factory by used Tecnomatix. Simulate the system for 10 hours of scenario then track cycle time and production rate. If the goal of improvement is increase production rate and productivity line balancing, how to do you improve the production line? Objective This lab reinforces the following skill: Concept of Factory digitalization and Simulation. Manipulate parameters of the model to achieve the goal.
